Heating system heating principle
Electric film on the subject was able to play the role of rapid warming, lies in its 100% energy input is converted into effective over 60% of the conduction of heat and more than 30% of the infrared radiation. This dual heating principle, so that the heated object: the first heating up faster, the second is more adequate to absorb heat.
Thermal conduction heating
Electric film plane or carbon crystal plate laying on the ground below decorating material, electric panels in the electric field through nanoscale carbon crystal molecules do Brownian motion and friction heat, so that the heating plate surface temperature, and continue through the close of electric insulating material covering plate, and the back of electric material, heat insulating material to keep the heat reflective surface of the heat generator cover, so that the surface temperature.
As long as 2-4 minutes after reached between heat generation and heat the thermal balance, a constant temperature heat radiation. Heated slowly to the ground and then heat the indoor air to pass close to the ground. By "hot air is lighter, cold heavy" role of this thermal engineering principles, rose rapidly after the close air heating the ground, cold air constantly added to the heated surface is warmed through and back and forth so ....... Ultimately down vertical convection air temperature led to enhance the indoor environment.
Far-infrared radiation heating
Electric film or carbon crystal plate in the electric field will produce a large number of wavelengths up 8u - 15u far infrared, infrared receptors after acceptance, be absorbed into heat, so the temperature receptors. Its principle as "sunny things" for the same reason.
Practice has proved that the human body feels the same comfortable environment, infrared heating than air convection required
Slightly warm superconducting module features:
Slightly warm Micwarm superconducting module uses an external heat superconducting nano spacecraft materials, heat can quickly heating cables and plumbing will produce rapid conduction (heat transfer performance is six times the ordinary metallic materials), by line into a face radiating heat, uniform planar radiating material laying on the ground to effectively protect the stability and foot feeling comfortable no temperature difference; superconducting hot surface while black charcoal far infrared divergence, adsorption of formaldehyde, VOC and other harmful substances, clean indoor air; groove alignment tube design obviates the backfill layer, directly or dry laid stone floor, greatly reducing the heat transmission distance, cost savings, energy and story. Make winter heating room indoor temperature to enhance efficiency, achieve the purpose of heating. It is far superior than traditional heating efficiency of coal-fired central heating and energy consumption of large quantities of natural gas wall traditional gas boiler heating mode.
Eco-friendly representation of the superconducting module mark slightly warm charcoal black superconducting hot surfaces. It is the generation of technological innovation on the basis of the traditional process on warm, to solve the traditional warm defects and deficiencies in the construction process. To solve the traditional warm wooden floors, with wooden floor temperature rises, to accelerate the release of formaldehyde problems. Warm winter heating, wood flooring formaldehyde release acceleration, temperature rise per 1 ℃, the concentration of formaldehyde in indoor air will rise from 0.15 to 0.37 times. When the temperature rises to 34 ℃, relative humidity of 50%, the concentration of formaldehyde in the air release may exceed 5.53 times the standard. After entering the winter heating, if the home is used to warm gradually increased with the ground temperature, the volatile formaldehyde also accelerated the pace, so the application of micro-warm charcoal black superconducting modules and high-quality warm the floor, can be completely safe to use warm.
